How To Use The Small Corn Harvester Correctly

The small corn harvester should enter the ground at a low forward speed, but the engine must reach the normal working speed before the harvest, so that the threshing machine can run at full speed. Before the self-propelled small corn harvester enters the ground, the working gear should be selected, and the stepless speed should be reduced to the minimum speed. When the forward speed is increased, try to achieve the stepless speed change, and avoid changing the gear position. When receiving the ground, slowly raise the header and reduce the forward speed and turn, but the throttle should not be reduced to avoid blockage of the barrel. Please familiarize yourself.

Key Points For Purchasing Combines

Self-propelled wheel type full feed combine harvester. This type of machine is more suitable for North China, Northeast China, Northwest China, Central Plains and dryland environment. It mainly harvests wheat and combines rice, which is suitable for long-distance transfer. It is the main type of harvesting and cross-regional operation.

Use Of Combine Harvester

The grain combine harvester is mainly used for the combined harvesting of wheat crops. It can complete cutting, threshing, separation and cleaning at one time in the field. When used for subsection harvesting, grains picker can be installed on the harvesting table to pick up grain strips after drying, and complete threshing, separation and cleaning operations. Rice, maize, soybean, millet and elevated grain crops can be harvested by adding accessory devices (such as soybean low harvesting device) on grain combine or by proper modification and adjustment.

Combine Harvester